Fedora10の各種設定

このぺーじでは、私がFedora10をリモート管理するために設定した内容をメモとして残しておくことにします。

個人のメモ書きなので、内容の正確性について保証はいたしません。

情報源としては、Fedora JP 掲示板をおすすめします。

ここで設定する内容は、リモートデスクトップ(VNC)を使うこととSambaでのWindowsマシンとのファイル共有を行うことです。
またSElinuxなどのセキュリティは設定項目が多く難しいので、危険を承知で「無効化」しています。(LAN内での非公開テストマシンとして利用します。)

PCのハードウェア構成

CPU
AMD Duron 800MHz
MEM
PC133 SD-RAM 512MB
M/B
ECS K7SEM
HDD
Hitachi Deskstar 60GB
CD-RW
CDRW-32
FDD
3MODE FDD
VGA
K7SEM内蔵VGA (SiS 300相当) V-RAM MainMemoryから16MB割り当て
KB
日本語106キー
モニター
三菱RDS151X(15'CRTモニター)
Mouse
ボール式ホイールマウス

HDDのパーティション割り当て

OS
Windows98とFedora10のデュアルブート構成
HDD-p1
12.9GB(Win98領域)
HDD-p2
31.2GB(共有データ領域)
HDD-p3
7.3MB(Fedoraブート領域)
HDD-p4
4.2GB(usr領域)
HDD-p5
1.0GB(var領域)

Fedora10を動作させるには、かなり厳しいハードウェア環境ですが、インストールは、デスクトップとサーバーのオプションを選択しています。
ここから、リモートデスクトップとWindowsとの共有設定を行います。

リモート管理用設定

0.設定ファイルを編集するためのコマンドとエディター操作の仕方
 最初に、GUIツールでは操作できない設定項目をconfigファイルを編集して変更設定するための操作方法とunixコマンドを例示しておきます。
unixコマンドを使うには、
GUIメニューから「アプリケーション」→「システムツール」→「端末」と選択し
端末ウィンドーから [xxxx@fedora10 -]$ ■

[xxxx@fedora10 -]$ su -■

[xxxx@fedora10 -]$ su -
パスワード:■
でrootユーザー(インストール時に設定)のパスワードを入力します。
[root@fedora10 -]# ■
としてroot権限で操作を行います。
通常、ファイルの編集には、viコマンドを使うのが標準のようですが、私は、GUIでフルスクリーンエディターを利用するので、
[root@fedora10 -]# gedit /etc/sysconfig/selinux
のようにgeditを起動します。(/etc/sysconfig/selinux では、セキュリティの設定ファイルを指定しています。)
※端末コマンドでgeditを使うと、ソケットエラーが発生しますが、編集・保存などの動作に支障はないようです。

1.SELinuxの停止
SELinuxは、安全にLinuxを利用するためのセキュリティの肝です。
デスクトップ環境で平常利用する場合は、デフォルト(既定値)での運用が望ましいと思います。
しかし、Webサーバーやファイルサーバーなどでのサーバー運用を考える場合には、設定の変更が必要となります。
SELinuxの設定を変更するには、
GUIメニューから「アプリケーション」→「システムツール」→「端末」と選択し端末ウインドウを表示します。
[xxxx@fedora10 -]$ ■
↓コマンド su - を入力します。
[xxxx@fedora10 -]$ su -■
↓「ENTER」キーを押すとパスワードを尋ねられます。
[xxxx@fedora10 -]$ su -
パスワード:■
↓ここでrootユーザー(インストール時に設定)のパスワードを入力します。
[root@fedora10 -]# ■
↓プロンプトの$が#に変わったらroot権限で操作が行えます。
[root@fedora10 -]# setenforce 0
↓setenforce 0 でSELinuxを停止します。
[root@fedora10 -]# getenforce
Permissive (セキュリティが無効となっている表示です。)
[root@fedora10 -]# gedit /etc/sysconfig/selinux
↓セキュリティの設定ファイルを編集します。

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=enforcing → SELINUX=disabled に変更。
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
SELINUXTYPE=targeted

geditのメニューバーにある「ファイル」から変更を保存して、編集を終了します。

2.ファイアーウォールの停止
デスクトップ上部にあるGUIのメニューから「システム」→「管理」→「ファイアーウォール」を選択して
「無効」のボタンをクリックします。

3.リモートデスクトップの利用設定
デスクトップ上部にあるGUIのメニューから「システム」→「設定」→「インターネットとネットワーク」→「リモートデスクトップ」を選択します。
「全般」タブの
「共有」から
●他のユーザーが自分のデスクトップを表示できる(V)
  ●他のユーザーがデスクトップを操作できる(A)
にチェックを入れ
「セキュリティ」の
●パスワードの入力を要求する(R):
 パスワード(P)******
を設定します。
※ネットワーク上の他のPCからリモート操作を行うには、IPアドレスでPCを指定し、パスワードの要求が表示されたらパスワードを入力します。
※sambaサーバーを設定・起動したらIPアドレスでなくPC名で接続できるようになります。

4.Sambaの設定と起動
Sambaは、WindowsマシンとLinuxマシンでファイル共有を行ったり、WindowsマシンからLinuxマシンをPC名で扱うために使用します。
もちろん、Linuxマシンとのファイル共有が不要で、LinuxマシンをIPアドレスで扱うことにするならば、Sambaを設定・起動する必要はありません。
Sambaの設定は、
端末ウィンドーからroot権限で設定ファイルを編集します。
[root@fedora10 -]# gedit /etc/samba/smb.conf (Sambaの設定ファイルを編集します。)
↓(設定箇所は[Grobal]の指定とディレクトリー(フォルダー)の共有設定を最後に付け加えます。)
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba-share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================

[global]
log file = /var/log/samba/log.%m
netbios name = fedora10 ; PCの名前を指定します。
guest account = root ; ゲストアカウントの権限を指定します。
cups options = raw
server string = Samba Server Version %v
dos charset = CP932
guest ok = yes ; ゲストアカウントでのアクセスを許可します。
workgroup = mygroup ; Windowsのワークグループ名を指定します。
os level = 20
encrypt passwords = no ; パスワードの暗号化を指定します。(パスワードは共有設定ごとに個別指定します。)
security = share
passdb backend = tdbsam
max log size = 50

# ----------------------- Netwrok Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#

; netbios name = MYSERVER

; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
; hosts allow = 127. 192.168.12. 192.168.13.

# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach

# logs split per machine
# max 50KB per log file, then rotate

# ----------------------- Standalone Server Options ------------------------
#
# Scurity can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.


; unix charset = utf-8


# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *


; realm = MY_REALM

; password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations.
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#

; domain master = yes
; domain logons = yes

# the login script name depends on the machine name
; logon script = %m.bat
# the login script name depends on the unix user used
; logon script = %u.bat
; logon path = \\%L\Profiles\%u
# disables profiles support by specifing an empty path
; logon path =

; add user script = /usr/sbin/useradd "%u" -n -g users
; add group script = /usr/sbin/groupadd "%g"
; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
; delete user script = /usr/sbin/userdel "%u"
; delete user from group script = /usr/sbin/userdel "%u" "%g"
; delete group script = /usr/sbin/groupdel "%g"


# ----------------------- Browser Control Options ----------------------------
#
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
#
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
#
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; local master = no
; os level = 33
; preferred master = yes

#----------------------------- Name Resolution -------------------------------
# Windows Internet Name Serving Support Section:
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
#
# - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
#
# - WINS Server: Tells the NMBD components of Samba to be a WINS Client
#
# - WINS Proxy: Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
#
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups.

; wins support = yes
; wins server = w.x.y.z
; wins proxy = yes

; dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# Load Printers let you load automatically the list of printers rather
# than setting them up individually
#
# Cups Options let you pass the cups libs custom options, setting it to raw
# for example will let you use drivers on your Windows clients
#
# Printcap Name let you specify an alternative printcap file
#
# You can choose a non default printing system using the Printing option

; load printers = yes

; printcap name = /etc/printcap
#obtain list of printers automatically on SystemV
; printcap name = lpstat
; printing = cups

# --------------------------- Filesystem Options ---------------------------
#
# The following options can be uncommented if the filesystem supports
# Extended Attributes and they are enabled (usually by the mount option
# user_xattr). Thess options will let the admin store the DOS attributes
# in an EA and make samba not mess with the permission bits.
#
# Note: these options can also be set just per share, setting them in global
# makes them the default for all shares

; map archive = no
; map hidden = no
; map read only = no
; map system = no
; store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
comment = Home Directories
browseable = no
writable = yes
; valid users = %S
; valid users = MYDOMAIN\%S

[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
; guest ok = no
; writable = No
printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
; [Profiles]
; path = /var/lib/samba/profiles
; browseable = no
; guest ok = yes


# A publicly accessible directory, but read only, except for people in
# the "staff" group
; [public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = +staff

# ファイルを共有するには、この行以降を追加
[user] ; 共有フォルダの名前:user
force create mode = 755 ; ファイル強制作成時のパーミッション:755
guest ok = yes ; ゲストユーザー:許可
writeable = yes ; ファイル書き込み:許可
create mode = 0755 ; ファイル作成時のパーミッション:0755
path = /home/user ; 共有場所:/home/user
force directory mode = 777 ; ディレクトリー強制作成時のパーミッション:777
directory mode = 0777 ; ディレクトリー作成時のパーミッション:0777
; browseable = yes ; ブラウザ表示:コメントアウト(既定値は不可)

; share modes = yes ; リナックス共有:コメントアウト(既定値は不可)

[html] ; 共有フォルダの名前:html
force create mode = 755 ; ファイル強制作成時のパーミッション:755
guest ok = yes ; ゲストユーザー:許可
writeable = yes ; ファイル書き込み:許可
create mode = 0755 ; ファイル作成時のパーミッション:0755
path = /var/www ; 共有場所:/var/www/html
force directory mode = 777 ; ディレクトリー強制作成時のパーミッション:777
directory mode = 0777 ; ディレクトリー作成時のパーミッション:0777
; browseable = yes ; ブラウザ表示:コメントアウト(既定値は不可)

; share modes = yes ; リナックス共有:コメントアウト(既定値は不可)
# ここまで

変更した設定を保存してgeditを終了します。
GUIメニューから、「システム」→「管理」→「サービス」を選択し、
smbを起動します。
端末ウィンドからはroot権限にて
# /etc/init.d/smb restart
で再起動できます。 これで、Windowsネットワークとのファイル共有の設定は終了です。

 

 

 

とりあえず、こんな設定でWindowsマシンからリモート操作を行えるようになりました。



【サイト内リンク】

 

連絡先:お問い合わせフォーム